5625.0 - Private New Capital Expenditure and Expected Expenditure, Australia, Dec 2008 
Quality Declaration
Quality Declaration ARCHIVED ISSUE Released at 11:30 AM (CANBERRA TIME) 26/02/2009
Page tools:
 Print Page
 Print All
| ||
EXPLANATORY NOTES
Wholesale trade (Division F) Retail trade (Division G) Transport and storage (Division I) Finance and insurance (Division K, but excluding Superannuation funds
Other selected services:
Accommodation, cafes and restaurants (Division H) Communication services (Division J) Cultural and recreational services (Division P) Personal services (Subdivision 95) 3 The survey excludes the following industries: Agriculture, forestry and fishing (Division A) Government administration and defence (Division M) Superannuation funds (Class 7412) Education (Division N) Health and community services (Division O) Other services (Subdivision 96) 4 The scope excludes public sector business units (i.e. all departments, authorities and other organisations owned and controlled by Commonwealth, State and Local Government). 5 The Survey of New Capital Expenditure, like most ABS economic collections, takes its frame from employing businesses on the ABS Business Register which is primarily based on registrations to the Australian Taxation Office's Pay As You Go Withholding (PAYGW) scheme (and prior to 1 July 2000 the Group Employer scheme). The frame is updated quarterly to take account of new businesses, businesses which have ceased employing, changes in employment levels, changes in industry and other general business changes. 6 Businesses which have ceased employing are identified when the Australian Taxation Office (ATO) cancels their PAYGW registration (or previously their Group Employer registration). In addition, from September quarter 1999, businesses which did not remit under the Group Employer scheme for the previous five quarters were removed from the frame. A similar process has been adopted to remove businesses which did not remit under the PAYGW scheme. 7 The statistics in this publication exclude non-employing businesses. Though there are a substantial number of these businesses, it is expected that they would not contribute significantly to the estimates, although the impact would vary from industry to industry. STATISTICAL UNIT 8 In the Survey of New Capital Expenditure, the statistical unit used to represent businesses, and for which statistics are reported, is the Australian Business Number (ABN) unit, in most cases. The ABN unit is the business unit which has registered for an ABN, and thus appears on the ATO administered Australian Business Register. This unit is suitable for ABS statistical needs when the business is simple in structure. For more significant and diverse businesses where the ABN unit is not suitable for ABS statistical needs, the statistical unit used is the Type of Activity Unit (TAU). A TAU is comprised of one or more business entities, sub-entities or branches of a business entity within an Enterprise Group that can report production and employment data for similar economic activities. When a minimum set of data items is available, a TAU is created which covers all the operations within an industry subdivision (and the TAU is classified to the relevant subdivision of the Australian and New Zealand Standard Industrial Classification (ANZSIC)). Where a business cannot supply adequate data for each industry, a TAU is formed which contains activity in more than one industry subdivision and the TAU is classified to the predominant ANZSIC subdivision. Further details about the ABS economic statistical units used in this survey, and in other ABS economic surveys (both sample surveys and censuses), can be found in Chapter 2 of the Standard Economic Sector Classifications of Australia (SESCA) 2002 (cat. no. 1218.0). SURVEY METHODOLOGY 9 The survey is conducted by mail on a quarterly basis. It is based on a random sample of approximately 8,000 units which is stratified by industry, state/territory and number of employees. The figures obtained from the selected businesses are supplemented by data from units which have large capital expenditure and/or large employment and which are outside the sample framework, or not adequately covered by it. 10 Respondents are asked to provide data on the same basis as their own management accounts. Where a selected unit does not respond in a given survey period, a value is estimated. If data are subsequently provided, the estimated value is replaced with reported data. Aggregates are calculated from all data using the ‘number raised’ estimation technique. Data are edited at both individual unit level and at aggregate level. TIMING AND CONSTRUCTION OF SURVEY CYCLE 11 Surveys are conducted in respect of each quarter and returns are completed in the 8 or 9 week period after the end of the quarter to which the survey data relate (e.g. September quarter survey returns are completed during October and November). 12 Businesses are requested to provide 3 basic figures each survey:
13 This survey cycle facilitates the formation of estimates of expenditure for financial years (12 months ending 30 June) which are presented in tables 5 and 6 of this publication. For example, as the previous table shows for 2008-2009:
14 Businesses are requested to provide actual expenditure data by state/territory each quarter. Prior to 2002, businesses were also asked to provide expected expenditure data by state/territory each December quarter. Since 2002 state/territory expectations data have been directly collected each December quarter only from selected businesses contributing significantly to data for a particular state or territory. Expectations data for the remaining businesses which operate in more than one state or territory are pro-rated to states/territories based on actual expenditure for the December quarter in each state or territory. As has always been the case, expectations data for businesses operating within a single state/territory are allocated to that state/territory. 15 These expectations data by state/territory are not included in this publication but are released on the ABS Website and are available on request. SAMPLE REVISION 16 The survey frames and samples are revised each quarter to ensure that they remain representative of the survey population. The timing for creating each quarter's survey frame is consistent with that of other ABS business surveys. This provides for greater consistency when comparing data across surveys. 17 Additionally, with these revisions to the sample, some of the units from the sampled sector are rotated out of the survey and are replaced by others to spread the reporting workload equitably. 18 Adjustments are included in the estimates to allow for lags in processing new businesses to the ABS Business Register, and the omission of some businesses from the register. The majority of businesses affected and to which adjustments apply are small in size. As an indication of the size of these adjustments, in the December quarter 2008 they represented about 0.2% of the total estimate of new capital expenditure. CLASSIFICATION BY INDUSTRY 19 The Australian and New Zealand Standard Industrial Classification (ANZSIC) has been developed for use in both countries for the production and analysis of industry statistics. For more information, users are referred to Australian and New Zealand Standard Industrial Classification (ANZSIC), 1993 (cat. no. 1292.0). 20 In order to classify new capital expenditure by industry, each statistical unit (as defined above) is classified to the (ANZSIC) industry in which it mainly operates. CHAIN VOLUME MEASURES 21 The chain volume measures appearing in this publication are annually reweighted chain Laspeyres indexes referenced to current price values in the chosen reference year (currently 2006-07). The current price values may be thought to be the product of a price and quantity. The value in chain volume terms can be derived by linking together movements in volumes, calculated using the average prices of the previous financial year and applying compound movements to the current price estimates of the reference year. Each year's quarter-to-quarter growth rates in the chain volume series are based on the prices of the previous financial year, except for those quarters of the latest incomplete year which are based upon the second most recent financial year. Quarterly chain volume estimates for a financial year sum to the corresponding annual estimate. 22 With each release of the September quarter issue of this publication, a new base year is introduced and the reference year is advanced one year to coincide with it. With this release of the September quarter 2008 issue of this publication, the chain volume measures for 2007-08 now have 2006-07 (the previous financial year) as their base year rather than 2005-06, and the reference year is 2006-07. 23 A change in the reference year changes levels but not growth rates for all periods. A change in the base year can result in revisions, small in most cases, to growth rates for the last year. 24 Chain volume measures are not generally additive. In other words, component chain volume measures do not, in general, sum to a total in the way original current price components do. For capital expenditure data, this means that the original chain volume estimates for industry groups will not add to total capital expenditure for Australia. In order to minimise the impact of this, the ABS uses the latest base year as the reference year. By adopting this approach, additivity does exist for the quarters following the reference year and non-additivity is relatively small for the quarters in the reference year and those immediately preceding it. For further information on chain volume measures refer to Information Paper: Introduction of Chain Volume Measures in the Australian National Accounts (cat. no. 5248.0). DERIVATION AND USEFULNESS OF REALISATION RATIOS 25 Once actual expenditure for a financial year is known, it is useful to investigate the relationship between each of the prior six estimates of expenditure for that financial year and the actual expenditure (see page 6 for an explanation of the derivation of the seven estimates). The resultant realisation ratios (subsequent actual expenditure divided by expected expenditure) then indicate how much expenditure was actually incurred against the amount expected to be incurred at the various times of reporting. Realisation ratios can also be formed separately for three or six month expectations as well as the 12 month E2 estimates or combinations of estimates containing at least some expectation components (e.g. six months actual and six months expected expenditure). 26 Realisation ratios provide an important tool in understanding and interpreting expectation statistics for future periods. The application of realisation ratios enables the adjustment of expectation data for known under (or over) realisation patterns in the past and hence provides a valid basis for comparison with other expectation data and actual expenditure estimates. Once this has been done the predictions can be more validly compared with each other and with previously derived estimates of actual expenditure for earlier years. For example, if one wished to make a prediction about actual expenditure for 2008-09 based on the December 2008 survey results and compare this with 2007-08 expenditure, it is necessary to apply the relevant realisation factors to the expectation to put both estimates on the same basis. 27 There are many ways in which realisation ratios can be applied to make predictions of actual expenditure for a future period. A range of realisation ratios for both type of asset and industry estimates is provided in tables 5 and 6. 28 In using realisation ratios to adjust expectations data, attention should be paid to the range of values that has occurred in the past. A wide range of values is indicative of volatility in the realisation patterns and hence greater caution should be exercised regarding the predictive value of the expectation, even after adjustment by application of realisation ratios. This is particularly the case with the early 12 month expectations for the following financial year collected in the December and March surveys. EXPERIMENTAL PROJECTED CAPITAL EXPENDITURE 29 Current short and long term expectations are of varying periods depending on the quarter in which they are collected (see paragraph 12 of the Explanatory Notes). Each expectation from the beginning of the time series is confronted with the actual expenditure that occurred in each quarter to which that expectations figure related (for example, September quarter 2008 short-term expectations related to the December quarter 2008). The output of this is to produce a quarterly realisation ratio for each expectations estimate through time. 30 Five-year average realisation ratios are then calculated. These average realisation ratios are applied to contemporary expectations to produce estimates of projected expenditure for forthcoming quarters. 31 These estimates of likely expenditure are then linked with the current price time series of actual expenditure to produce a quarterly time series which extends to the end point of the contemporary expectations series. For December, March and June quarters, the end point is 30 June of the following financial year. For September quarters, the end point is 30 June of the current financial year. 32 The resultant quarterly time series are then produced in trend terms. The same aggregation structure which is used to produce seasonally adjusted and trend estimates of actual capital expenditure is used for these projected series. (See Paragraphs 41 to 45 of the Explanatory notes for more information regarding seasonally adjusted and trend estimates). 33 While the ABS has produced these projected series to assist users in interpreting capital expenditure expectations, users should exercise caution in comparing these estimates with the estimates of actual and expected expenditure contained elsewhere in this release. In particular:
RELIABILITY OF THE ESTIMATES 34 Estimates provided in this publication are subject to non-sampling and sampling errors. The most common way of quantifying sampling error is to calculate the standard error for the published estimate. Details of standard errors are on pages 36 and 37 of this publication. 35 Estimates that have an estimated relative standard error between 10% and 25% are annotated with the symbol '^' . These estimates should be used with caution as they are subject to sampling variability too high for some purposes. Estimates with an RSE between 25% and 50% are annotated with the symbol '*', indicating that the estimate should be used with caution as it is subject to sampling variability too high for most practical purposes. Estimates with an RSE greater than 50% are annotated with the symbol '**' indicating that the sampling variability causes the estimates to be considered too unreliable for general use. These annotations have only been applied to estimates from the September quarter 2003. 36 Non-sampling errors may arise as a result of errors in the reporting, recording or processing of the data and can occur even if there is a complete enumeration of the population. These errors can be introduced through inadequacies in the questionnaire, treatment of non-response, inaccurate reporting by respondents, errors in the application of survey procedures, incorrect recording of answers, and errors in data entry and processing. 37 Estimates for the latest quarter presented in this publication are considered preliminary and revised estimates will be released with the next issue. As discussed in Paragraphs 41 to 45 below, seasonally adjusted and trend estimates are also subject to revision as data are revised and more data become available. 38 It is difficult to measure the size of non-sampling errors. However, every effort is made in the design of the survey and development of survey procedures to minimise their effects. In addition, respondents may have difficulties in allocating to the appropriate state(s) expenditure on some equipment items such as mobile assets (e.g. aircraft, bulk oil carriers, satellites, off-shore drilling platforms and large computer installations supporting a national network). Where such difficulties exist expenditure is allocated to the state of the businesses' head office or, in the case of aircraft, is allocated across states in proportion to the likely use of the asset. 39 The new Australian equivalents to International Financial Reporting Standards (AIFRS) began to be progressively implemented in Australia from 1 January 2005. As a result, a number of items in the financial accounts of Australian businesses have been affected by changed definitions which have in turn impacted upon both Income Statements and Balance Sheets. A range of ABS economic collections source data from financial accounts of businesses and use those data to derive economic statistics. There have been no changes in the associated economic definitions. 40 After monitoring data items since March quarter 2005 it has been concluded that most affected published data series have been impacted by data breaks, but that the magnitude of such breaks cannot be determined without imposing disproportionate load upon data providers to ABS surveys and other administratively collected data. ABS will continue to monitor developments and report any significant identified impacts or changes in methodology as a result of AIFRS. SEASONAL ADJUSTMENT 41 The quarterly original actual new capital expenditure series in this publication are affected in varying degrees by seasonal influences. The seasonal adjustment process estimates and removes the effects of normal seasonal variations from the original series so that the effects of other influences can be more easily recognised. 42 In the seasonal adjustment process, account has been taken of normal seasonal factors (e.g. increase in June quarter capital expenditure due to the impending end of the financial year) to produce the seasonally adjusted estimates. Particular care should be taken in interpreting quarterly movements in the seasonally adjusted estimates because seasonal adjustment does not remove the effect of irregular or non-seasonal influences (e.g. change in interest rates) and reflects the sampling and other errors to which the original estimates are subject. The revision properties of the seasonally adjusted and trend estimates can be improved by the use of Autoregressive Integrated Moving Average (ARIMA) modelling. The Survey of Private New Capital Expenditure uses ARIMA modelling where appropriate for individual time series. ARIMA modelling relies on the characteristics of the series being analysed to project future period data. The projected values are temporary, intermediate values that are only used internally to improve the estimation of the seasonal factors. The projected data do not affect the original estimates and are discarded at the end of the seasonal adjustment process. The ARIMA model is assessed as part of the annual reanalysis which is completed each September quarter. For more information on the details of ARIMA modelling see Feature article: Use of ARIMA modelling to reduce revisions in the October 2004 issue of Australian Economic Indicators (cat. no. 1350.0). 43 Seasonally adjusted estimates by asset type for Tasmania, Northern Territory and Australian Capital Territory are not separately available because of the high sampling variability associated with them. They are included in totals for Australia and while a combined residual can be derived, the measure should not be considered reliable. TREND ESTIMATES 44 The trend estimates are derived by applying a 7-term Henderson moving average to the seasonally adjusted estimates. The 7-term Henderson moving average is symmetric, but as the end of a time series is approached, asymmetric forms of the moving average are applied. The asymmetric moving average has been tailored to suit the particular characteristics of individual series and enable trend estimates for recent quarters to be produced. Estimates of the trend will be improved at the current end of the time series as additional observations become available. This improvement is due to the application of different asymmetric moving averages for the most recent three quarters. As a result of the improvement, revisions to the trend estimates will generally be observed for the most recent three quarters. 45 There may also be revisions because of changes in the original estimates. As a result of these revisions, the seasonally adjusted and trend estimates will also be revised. For further information, see Information Paper: A Guide to Interpreting Time Series - Monitoring Trend, An Overview (cat. no. 1349.0) or contact the Assistant Director, Time Series Analysis on Canberra (02) 6252 6345 or email <time.series.analysis@abs.gov.au>. DESCRIPTION OF TERMS 46 A description of the terms used in this publication is given below: 47 New capital expenditure refers to the acquisition of new tangible assets either on own account or under a finance lease and includes major improvements, alterations and additions. In general, this is expenditure charged to fixed tangible assets accounts excluding expenditure on second hand assets unless these are imported for the first time. 48 Some estimates are dissected by type of asset:
COMPARISON WITH NATIONAL ACCOUNTS AND OTHER ABS STATISTICS 49 The statistics for new capital expenditure shown in this publication differ from estimates of private gross fixed capital expenditure shown in the Australian National Accounts for the following reasons:
50 For a more detailed explanation of the concepts and methods used in compiling the National Accounts estimates see Australian National Accounts: Concepts, Sources and Methods (cat. no. 5216.0). 51 The estimates of capital expenditure on buildings and other structures will differ with estimates of Construction activity published in Construction Work Done, Australia, Preliminary (cat. no. 8755.0). The latter publication presents estimates of building and engineering construction work collected by the Building Activity Survey and the Engineering Construction Survey. Estimates of construction activity are based on the value of actual work done during the quarter of individual building or construction jobs by builders, and do not necessarily equate to capitalisation of this work by the builders' eventual clients. Estimates of capital expenditure in this publication are based on data reported by businesses (that is, the builders' clients) from their financial or management accounts for purchases of buildings and structures. RELATED PUBLICATIONS 52 Users may also wish to refer the following publications:
53 Current publications and other products released by the ABS are listed in the Catalogue of Publications and Products (cat. no. 1101.0). The Catalogue is available from any ABS office or the ABS web site <https://www.abs.gov.au>. The ABS also issues a daily Release Advice on the web site which details products to be released in the week ahead. ABS DATA AVAILABLE ON REQUEST 54 In addition to the data contained in this publication, more detailed industry and state information may be made available on request, the cost for such a service being dependent upon the amount of data requested. For example, data are generally available at the ANZSIC group (3 digit) level. ABS WEBSITE 55 The ABS website contains most of the data included in this publication but with a longer time series. In addition to the series in this publication, data for Manufacturing Subdivisions and State by Industry data are also available. A full list of available Time Series Spreadsheets available on the ABS Website is in Appendix 2 on page 38. ACKNOWLEDGMENT 56 ABS publications draw extensively on information provided freely by individuals, businesses, governments and other organisations. Their continued cooperation is very much appreciated; without it, the wide range of statistics published by the ABS would not be available. Information received by the ABS is treated in strict confidence as required by the Census and Statistics Act 1905. Document Selection These documents will be presented in a new window.
|
||