1233.0 - Australian Harmonized Export Commodity Classification (AHECC), Jan 2006  
ARCHIVED ISSUE Released at 11:30 AM (CANBERRA TIME) 17/06/2003   
   Page tools: Print Print Page  


Sub-Chapter I

Primary forms

3901Polymers of ethylene, in primary forms

3902Polymers of propylene or of other olefins, in primary forms

3903Polymers of styrene, in primary forms

3904Polymers of vinyl chloride or of other halogenated olefins, in primary forms

3905Polymers of vinyl acetate or of other vinyl esters, in primary forms; other vinyl polymers in primary forms

3906Acrylic polymers in primary forms

3907Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms

3908Polyamides in primary forms

3909Amino-resins, phenolic resins and polyurethanes, in primary forms

3910Silicones in primary forms

3911Petroleum resins, coumarone-indene resins, polyterpenes, polysulphides, polysulphones and other products specified in Note 3 to this Chapter, not elsewhere specified or included, in primary forms

3912Cellulose and its chemical derivatives, not elsewhere specified or included, in primary forms

3913Natural polymers (for example, alginic acid) and modified natural polymers (for example, hardened proteins, chemical derivatives of natural rubber), not elsewhere specified or included, in primary forms

3914Ion-exchangers based on polymers of 3901 to 3913, in primary forms


Sub-Chapter II

Waste, parings and scrap; semi-manufactures; articles

3915Waste, parings and scrap, of plastics

3916Monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics

3917Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics

3918Floor coverings of plastics, whether or not self-adhesive, in rolls or in the form of tiles; wall or ceiling coverings of plastics, as defined in Note 9 to this Chapter

3919Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls

3920Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

3921Other plates, sheets, film, foil and strip, of plastics

3922Baths, shower-baths, sinks, wash-basins, bidets, lavatory pans, seats and covers, flushing cisterns and similar sanitary ware, of plastics

3923Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics

3924Tableware, kitchenware, other household articles and toilet articles, of plastics

3925Builders' ware of plastics, not elsewhere specified or included


3926Other articles of plastics and articles of other materials of 3901 to 3914



NOTES

1. Throughout this Classification "plastics" means those materials of 3901 to 3914 which are or have been capable, either at the moment of polymerisation or at some subsequent stage, of being formed under external influence (usually heat and pressure, if necessary with a solvent or plasticiser) by moulding, casting, extruding, rolling or other process into shapes which are retained on the removal of the external influence.
Throughout this Classification any reference to "plastics" also includes vulcanised fibre. "Plastics", however, does not apply to materials regarded as textile materials of Section 11.


2. This Chapter does not cover:
    (a) Waxes of 2712 or 3404;
    (b) Separate chemically defined organic compounds (Chapter 29);
    (c) Heparin or its salts (3001);
    (d) Solutions (other than collodions) consisting of any of the products specified in 3901 to 3913 in volatile organic solvents when the weight of the solvent exceeds 50% of the weight of the solution (3208); stamping foils of 3212;
    (e) Organic surface-active agents or preparations of 3402;
    (f) Run gums or ester gums (3806);
    (g) Diagnostic or laboratory reagents on a backing of plastics (3822);
    (h) Synthetic rubber, as defined for the purposes of Chapter 40, or articles thereof;

    (ij) Saddlery or harness (4201) or trunks, suitcases, handbags or other containers of 4202;
    (k) Plaits, wickerwork or other articles of Chapter 46;
    (l) Wall coverings of 4814;
    (m) Goods of Section 11 (textiles and textile articles);
    (n) Articles of Section 12 (for example, footwear, headgear, umbrellas, sun umbrellas, walking-sticks, whips, riding-crops or parts thereof);
    (o) Imitation jewellery of 7117;
    (p) Articles of Section 16 (machines and mechanical or electrical appliances);
    (q) Parts of aircraft or vehicles of Section 17;
    (r) Articles of Chapter 90 (for example, optical elements, spectacle frames, drawing instruments);
    (s) Articles of Chapter 91 (for example, clock or watch cases);
    (t) Articles of Chapter 92 (for example, musical instruments or parts thereof);
    (u) Articles of Chapter 94 (for example, furniture, lamps and lighting fittings, illuminated signs, prefabricated buildings);
    (v) Articles of Chapter 95 (for example, toys, games, sports requisites); or
    (w) Articles of Chapter 96 (for example, brushes, buttons, slide fasteners, combs, mouthpieces or stems for smoking pipes, cigarette-holders or the like, parts of vacuum flasks or the like, pens, propelling pencils).


3. 3901 to 3911 apply only to goods of a kind produced by chemical synthesis, falling in the following categories:
    (a) Liquid synthetic polyolefins of which less than 60% by volume distils at 300 degrees Celsius, after conversion to 101.3 kPa when a reduced-pressure distillation method is used (3901 and 3902);
    (b) Resins not highly polymerised, of the coumarone-indene type (3911);
    (c) Other synthetic polymers with an average of at least 5 monomer units;
    (d) Silicones (3910);
    (e) Resols (3909) and other prepolymers.


4. "Copolymers" covers all polymers in which no single monomer unit contributes 95% or more by weight to the total polymer content.
For the purposes of this Chapter, except where the context otherwise requires, copolymers (including co-polycondensates, co-polyaddition products, block copolymers and graft copolymers) and polymer blends are to be classified in the heading covering polymers of that comonomer unit which predominates by weight over every other single comonomer unit. For the purposes of this Note, constituent comonomer units of polymers falling in the same heading shall be taken together.
If no single comonomer unit predominates, copolymers or polymer blends, as the case may be, are to be classified in the heading which occurs last in the numerical order among those which equally merit consideration.


5. Chemically modified polymers, that is those in which only appendages to the main polymer chain have been changed by chemical reaction, are to be classified in the heading appropriate to the unmodified polymer. This provision does not apply to graft copolymers.


6. In 3901 to 3914, "primary forms" applies only to the following forms:
    (a) Liquids and pastes, including dispersions (emulsions and suspensions) and solutions;
    (b) Blocks of irregular shape, lumps, powders (including moulding powders), granules, flakes and similar bulk forms.


7. 3915 does not apply to waste, parings and scrap of a single thermoplastic material, transformed into primary forms (3901 to 3914).


8. For the purposes of 3917, "tubes, pipes and hoses" means hollow products, whether semi-manufactures or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes). "Tubes, pipes and hoses" also includes sausage casings and other lay-flat tubing. However, except for the last-mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed 1.5 times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes and hoses but as profile shapes.


9. For the purposes of 3918, "wall or ceiling coverings of plastics" applies to products in rolls, of a width not less than 45 cm, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated.


10. In 3920 and 3921, "plates, sheets, film, foil and strip" applies only to plates, sheets, film, foil and strip (other than those of Chapter 54) and to blocks of regular geometric shape, whether or not printed or otherwise surface-worked, uncut or cut into rectangles (including squares) but not further worked (even if when so cut they become articles ready for use).


11. 3925 applies only to the following articles, not being products covered by any of the earlier headings of Sub-Chapter 2:
    (a) Reservoirs, tanks (including septic tanks), vats and similar containers, of a capacity exceeding 300 L;
    (b) Structural elements used, for example, in floors, walls or partitions, ceilings or roofs;
    (c) Gutters and fittings thereof;
    (d) Doors, windows and their frames and thresholds for doors;
    (e) Balconies, balustrades, fencing, gates and similar barriers;
    (f) Shutters, blinds (including Venetian blinds) and similar articles and parts and fittings thereof;
    (g) Large-scale shelving for assembly and permanent installation, for example, in shops, workshops, warehouses;
    (h) Ornamental architectural features, for example, flutings, cupolas, dovecotes; and

    (ij) Fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings, for example, knobs, handles, hooks, brackets, towel rails, switch-plates and other protective plates.

SUBHEADING NOTES

1. Within any one heading of this Chapter, polymers (including copolymers) and chemically modified polymers are to be classified according to the following provisions:
    (a) Where there is a subheading named "Other" in the same series:
      (1) The designation in a subheading of a polymer by the prefix "poly" (e.g., polyethylene and polyamide-6,6) means that the constituent monomer unit or monomer units of the named polymer taken together must contribute 95% or more by weight of the total polymer content.
      (2) The copolymers named in 3901.30, 3903.20, 3903.30 and 3904.30 are to be classified in those sub-headings, provided that the comonomer units of the named copolymers contribute 95% or more by weight of the total polymer content.
      (3) Chemically modified polymers are to be classified in the subheading named "Other", provided that the the chemically modified polymers are not more specifically covered by another subheading.
      (4) Polymers not meeting (1), (2) or (3) above, are to be classified in the subheading, among the remaining subheadings in the series, covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series of subheadings under consideration are to be compared.
    (b) Where there is no subheading named "Other" in the same series:
      (1) Polymers are to be classified in the subheading covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series under consideration are to be compared.
      (2) Chemically modified polymers are to be classified in the subheading appropriate to the unmodified polymer.
      Polymer blends are to be classified in the same subheading as polymers of the same monomer units in the same proportions.


2. For the purposes of 3920.43, the term "plasticisers" includes secondary plasticisers.



ADDITIONAL NOTES


1. In this Chapter, addition products of polyols with isocyanates, whether or not containing unreacted hydroxyl or isocyanate groups, are to be classified within 3909.50.

2. In 3909.50, "polyols" means polyhydroxy compounds containing 2 or more hydroxyl groups per molecule.


SECTION 07 - PLASTICS AND ARTICLES THEREOF; RUBBER AND ARTICLES THEREOF
CHAPTER 39 - PLASTICS AND ARTICLES THEREOF

NOTE: For goods exempt from Export Entry, refer to Explanatory Notes, 1.5 Instructions for Completing an Export Entry.

Heading no
HS
code
Export Statistical
Item
Unit of quantity
    Description
    SUB-CHAPTER 01 - PRIMARY FORMS
3901
    POLYMERS OF ETHYLENE, IN PRIMARY FORMS:
    3901.10
    3901.10.00
    KG
    - Polyethylene having a specific gravity of less than 0.94
    3901.20
    3901.20.00
    KG
    - Polyethylene having a specific gravity of 0.94 or more
    3901.30
    3901.30.00
    KG
    - Ethylene-vinyl acetate copolymers
    3901.90
    3901.90.00
    KG
    - Other
3902
    POLYMERS OF PROPYLENE OR OF OTHER OLEFINS, IN PRIMARY FORMS:
    3902.10
    3902.10.00
    KG
    - Polypropylene
    3902.20
    3902.20.00
    KG
    - Polyisobutylene
    3902.30
    3902.30.00
    KG
    - Propylene copolymers
    3902.90
    3902.90.00
    KG
    - Other
3903
    POLYMERS OF STYRENE, IN PRIMARY FORMS:
    3903.1
    - Polystyrene:
    3903.11
    3903.11.00
    KG
    -- Expansible
    3903.19
    3903.19.00
    KG
    -- Other
    3903.20
    3903.20.00
    KG
    - Styrene-acrylonitrile (SAN) copolymers
    3903.30
    3903.30.00
    KG
    - Acrylonitrile-butadiene-styrene (ABS) copolymers
    3903.90
    3903.90.00
    KG
    - Other
3904
    POLYMERS OF VINYL CHLORIDE OR OF OTHER HALOGENATED OLEFINS, IN PRIMARY FORMS:
    3904.10
    3904.10.00
    KG
    - Poly(vinyl chloride), not mixed with any other substance
    3904.2
    - Other poly(vinyl chloride):
    3904.21
    3904.21.00
    KG
    -- Non-plasticised
    3904.22
    3904.22.00
    KG
    -- Plasticised
    3904.30
    3904.30.00
    KG
    - Vinyl chloride-vinyl acetate copolymers
    3904.40
    3904.40.00
    KG
    - Other vinyl chloride copolymers
    3904.50
    3904.50.00
    KG
    - Vinylidene chloride polymers
    3904.6
    - Fluoro-polymers:
    3904.61
    3904.61.00
    KG
    -- Polytetrafluoroethylene
    3904.69
    3904.69.00
    KG
    -- Other
    3904.90
    3904.90.00
    KG
    - Other
3905
    POLYMERS OF VINYL ACETATE OR OF OTHER VINYL ESTERS, IN PRIMARY FORMS; OTHER VINYL POLYMERS IN PRIMARY FORMS:
    3905.1
    - Poly(vinyl acetate):
    3905.12
    3905.12.00
    KG
    -- In aqueous dispersion
    3905.19
    3905.19.01
    KG
    -- Other
    3905.2
    - Vinyl acetate copolymers:
    3905.21
    3905.21.00
    KG
    -- In aqueous dispersion
    3905.29
    3905.29.00
    KG
    -- Other
    3905.30
    3905.30.00
    KG
    - Poly(vinyl alcohol), whether or not containing unhydrolysed acetate groups
    3905.9
    - Other:
    3905.91
    3905.91.00
    KG
    -- Copolymers
    3905.99
    3905.99.00
    KG
    -- Other
3906
    ACRYLIC POLYMERS IN PRIMARY FORMS:
    3906.10
    3906.10.00
    KG
    - Poly(methyl methacrylate)
    3906.90
    3906.90.00
    KG
    - Other
3907
    POLYACETALS, OTHER POLYETHERS AND EPOXIDE RESINS, IN PRIMARY FORMS; POLYCARBONATES, ALKYD RESINS, POLYALLYL ESTERS AND OTHER POLYESTERS, IN POLYCARBONATES, ALKYD RESINS, POLYALLYL ESTERS AND OTHER POLYESTERS, IN

    PRIMARY FORMS:
    3907.10
    3907.10.00
    KG
    - Polyacetals
    3907.20
    3907.20.00
    KG
    - Other polyethers
    3907.30
    3907.30.00
    KG
    - Epoxide resins
    3907.40
    3907.40.00
    KG
    - Polycarbonates
    3907.50
    3907.50.00
    KG
    - Alkyd resins
    3907.60
    3907.60.00
    KG
    - Poly(ethylene terephthalate)
    3907.9
    - Other polyesters:
    3907.91
    3907.91.00
    KG
    -- Unsaturated
    3907.99
    3907.99.00
    KG
    -- Other
3908
    POLYAMIDES IN PRIMARY FORMS:
    3908.10
    3908.10.00
    KG
    - Polyamide-6, -11, -12, -6,6, -6,9, -6,10 or -6,12
    3908.90
    3908.90.00
    KG
    - Other
3909
    AMINO-RESINS, PHENOLIC RESINS AND POLYURETHANES, IN PRIMARY FORMS:
    3909.10
    3909.10.00
    KG
    - Urea resins; thiourea resins
    3909.20
    3909.20.00
    KG
    - Melamine resins
    3909.30
    3909.30.00
    KG
    - Other amino-resins
    3909.40
    3909.40.00
    KG
    - Phenolic resins
    3909.50
    3909.50.00
    KG
    - Polyurethanes
3910
    3910.00
    3910.00.00
    KG
    SILICONES IN PRIMARY FORMS
3911
    PETROLEUM RESINS, COUMARONE-INDENE RESINS, POLYTERPENES, POLYSULPHIDES, POLYSULPHONES AND OTHER PRODUCTS SPECIFIED IN NOTE 3 TO THIS CHAPTER, NOT ELSEWHERE SPECIFIED OR INCLUDED, IN PRIMARY FORMS:
    3911.10
    3911.10.00
    KG
    - Petroleum resins, coumarone, indene or coumarone-indene resins and
    polyterpenes
    3911.90
    3911.90.00
    KG
    - Other
3912
    CELLULOSE AND ITS CHEMICAL DERIVATIVES, NOT ELSEWHERE SPECIFIED OR INCLUDED, IN PRIMARY FORMS:
    3912.1
    - Cellulose acetates:
    3912.11
    3912.11.00
    KG
    -- Non-plasticised
    3912.12
    3912.12.00
    KG
    -- Plasticised
    3912.20
    3912.20.00
    KG
    - Cellulose nitrates (including collodions)
    3912.3
    - Cellulose ethers:
    3912.31
    3912.31.00
    KG
    -- Carboxymethylcellulose and its salts
    3912.39
    3912.39.00
    KG
    -- Other
    3912.90
    3912.90.00
    KG
    - Other
3913
    NATURAL POLYMERS (FOR EXAMPLE, ALGINIC ACID) AND MODIFIED NATURAL POLYMERS (FOR EXAMPLE, HARDENED PROTEINS, CHEMICAL DERIVATIVES OF NATURAL RUBBER), NOT ELSEWHERE SPECIFIED OR INCLUDED, IN PRIMARY FORMS:
    3913.10
    3913.10.00
    KG
    - Alginic acid, its salts and esters
    3913.90
    3913.90.00
    KG
    - Other
3914
    3914.00
    3914.00.00
    KG
    ION-EXCHANGERS BASED ON POLYMERS OF 3901 TO 3913, IN PRIMARY FORMS
    SUB-CHAPTER 02 - WASTE, PARINGS AND SCRAP; SEMI-MANUFACTURES; ARTICLES
3915
    WASTE, PARINGS AND SCRAP, OF PLASTICS:
    3915.10
    3915.10.00
    KG
    - Of polymers of ethylene
    3915.20
    3915.20.00
    KG
    - Of polymers of styrene
    3915.30
    3915.30.00
    KG
    - Of polymers of vinyl chloride
    3915.90
    3915.90.92
    KG
    - Of other plastics
3916
    MONOFILAMENT OF WHICH ANY CROSS-SECTIONAL DIMENSION EXCEEDS 1 MM, RODS, STICKS AND PROFILE SHAPES, WHETHER OR NOT SURFACE-WORKED BUT NOT OTHERWISE WORKED, OF PLASTICS:
    3916.10
    3916.10.02
    KG
    - Of polymers of ethylene
    3916.20
    3916.20.02
    KG
    - Of polymers of vinyl chloride
    3916.90
    3916.90.00
    KG
    - Of other plastics

3917
    TUBES, PIPES AND HOSES, AND FITTINGS THEREFOR (FOR EXAMPLE, JOINTS, ELBOWS, FLANGES), OF PLASTICS
3917.10
    3917.10.02
    KG
    - Artificial guts (sausage casings) of hardened protein or of cellulosic materials
3917.2
    - Tubes, pipes and hoses, rigid:
3917.21
    3917.21.02
    KG
    -- Of polymers of ethylene
3917.22
    3917.22.02
    KG
    -- Of polymers of propylene
3917.23
    3917.23.02
    KG
    -- Of polymers of vinyl chloride
3917.29
    3917.29.00
    KG
    -- Of other plastics
3917.3
    - Other tubes, pipes and hoses:
3917.31
    3917.31.02
    KG
    -- Flexible tubes, pipes and hoses, having a minimum burst pressure of 27.6 MPa
3917.32
    3917.32.02
    KG
    -- Other, not reinforced or otherwise combined with other materials, without fittings
3917.33
    3917.33.02
    KG
    -- Other, not reinforced or otherwise combined with other materials, with fittings
3917.39
    3917.39.02
    KG
    -- Other
3917.40
    3917.40.00
    KG
    - Fittings
3918
    FLOOR COVERINGS OF PLASTICS, WHETHER OR NOT SELF-ADHESIVE, IN ROLLS OR IN THE FORM OF TILES; WALL OR CEILING COVERINGS OF PLASTICS, AS DEFINED IN NOTE 9 TO THIS CHAPTER:
3918.10
    3918.10.00
    SM
    - Of polymers of vinyl chloride
3918.90
    3918.90.00
    SM
    - Of other plastics
3919
    SELF-ADHESIVE PLATES, SHEETS, FILM, FOIL, TAPE, STRIP AND OTHER FLAT SHAPES, OF PLASTICS, WHETHER OR NOT IN ROLLS:
3919.10
    3919.10.00
    SM
    - In rolls of a width not exceeding 20 cm
3919.90
    3919.90.00
    SM
    - Other
3920
    OTHER PLATES, SHEETS, FILM, FOIL AND STRIP, OF PLASTICS, NON-CELLULAR AND NOT REINFORCED, LAMINATED, SUPPORTED OR SIMILARLY COMBINED WITH OTHER MATERIALS:
3920.10
    3920.10.00
    KG
    - Of polymers of ethylene
3920.20
    3920.20.00
    KG
    - Of polymers of propylene
3920.30
    3920.30.00
    KG
    - Of polymers of styrene
3920.4
    - Of polymers of vinyl chloride:
3920.43
    -- Containing by weight not less than 6% of plasticisers:
    3920.43.10
    KG
    --- Rigid
    3920.43.20
    KG
    --- Flexible
3920.49
    -- Other:
    3920.49.30
    KG
    --- Rigid
    3920.49.40
    KG
    --- Flexible
3920.5
    - Of acrylic polymers:
3920.51
    3920.51.00
    KG
    -- Of poly(methyl methacrylate)
3920.59
    3920.59.00
    KG
    -- Other

3920.6
    - Of polycarbonates, alkyd resins, polyallyl esters or other polyesters:
3920.61
    3920.61.00
    KG
    -- Of polycarbonates
3920.62
    3920.62.00
    KG
    -- Of poly(ethylene terephthalate)
3920.63
    3920.63.00
    KG
    -- Of unsaturated polyesters
3920.69
    3920.69.00
    KG
    -- Of other polyesters
3920.7
    - Of cellulose or its chemical derivatives:
3920.71
    3920.71.00
    KG
    -- Of regenerated cellulose
3920.72
    3920.72.00
    KG
    -- Of vulcanised fibre
3920.73
    3920.73.00
    KG
    -- Of cellulose acetate
3920.79
    3920.79.00
    KG
    -- Of other cellulose derivatives
3920.9
    - Of other plastics:
3920.91
    3920.91.00
    KG
    -- Of poly(vinyl butyral)
3920.92
    3920.92.00
    KG
    -- Of polyamides
3920.93
    3920.93.00
    KG
    -- Of amino-resins
3920.94
    3920.94.00
    KG
    -- Of phenolic resins
3920.99
    3920.99.00
    KG
    -- Of other plastics
3921
    OTHER PLATES, SHEETS, FILM, FOIL AND STRIP, OF PLASTICS:
3921.1
    - Cellular:
3921.11
    3921.11.00
    KG
    -- Of polymers of styrene
3921.12
    3921.12.00
    KG
    -- Of polymers of vinyl chloride
3921.13
    3921.13.00
    KG
    -- Of polyurethanes
3921.14
    3921.14.00
    KG
    -- Of regenerated cellulose
3921.19
    3921.19.00
    KG
    -- Of other plastics
3921.90
    3921.90.01
    KG
    - Other
3922
    BATHS, SHOWER-BATHS, SINKS, WASH-BASINS, BIDETS, LAVATORY PANS, SEATS AND COVERS, FLUSHING CISTERNS AND SIMILAR SANITARY WARE, OF PLASTICS:
3922.10
    3922.10.02
    NO
    - Baths, shower-baths, sinks and wash-basins
3922.20
    3922.20.00
    NO
    - Lavatory seats and covers
3922.90
    3922.90.03
    NR
    - Other
3923
    ARTICLES FOR THE CONVEYANCE OR PACKING OF GOODS, OF PLASTICS; STOPPERS, LIDS, CAPS AND OTHER CLOSURES, OF PLASTICS:
3923.10
    3923.10.00
    NO
    - Boxes, cases, crates and similar articles
3923.2
    - Sacks and bags (including cones):
3923.21
    3923.21.01
    KG
    -- Of polymers of ethylene
3923.29
    3923.29.00
    NO
    -- Of other plastics
3923.30
    3923.30.00
    NO
    - Carboys, bottles, flasks and similar articles
3923.40
    3923.40.00
    NO
    - Spools, cops, bobbins and similar supports
3923.50
    3923.50.00
    NO
    - Stoppers, lids, caps and other closures
3923.90
    3923.90.01
    NR
    - Other
3924
    TABLEWARE, KITCHENWARE, OTHER HOUSEHOLD ARTICLES AND TOILET ARTICLES, OF PLASTICS:
3924.10
    3924.10.00
    NR
    - Tableware and kitchenware
3924.90
    3924.90.00
    NR
    - Other
3925
    BUILDERS' WARE OF PLASTICS, NOT ELSEWHERE SPECIFIED OR INCLUDED:
3925.10
    3925.10.00
    NO
    - Reservoirs, tanks, vats and similar containers, of a capacity exceeding 300 L
3925.20
    3925.20.00
    NR
    - Doors, windows and their frames and thresholds for doors
3925.30
    3925.30.00
    NR
    - Shutters, blinds (including Venetian blinds) and similar articles and parts thereof
3925.90
    3925.90.00
    NR
    - Other
3926
    OTHER ARTICLES OF PLASTICS AND ARTICLES OF OTHER MATERIALS OF 3901 TO 3914:
3926.10
    3926.10.00
    NR
    - Office or school supplies
3926.20
    3926.20.00
    NR
    - Articles of apparel and clothing accessories (including gloves, mittens and mitts)
3926.30
    3926.30.00
    NR
    - Fittings for furniture, coachwork or the like
3926.40
    3926.40.00
    NO
    - Statuettes and other ornamental articles
3926.90
    3926.90.01
    NR
    - Other

ISSUE DATE: 1 JANUARY 2002



Previous PageNext Page